KDS, E-Bar - Flybarless System

Produktbeskrivning:

KDS Models populära E-Bar System kan användas på alla elektriska och nitrodrivna flybarless helikoptrar från storlek 250 till 700.
Den stöder traditionella 90 graders swashar,  120 graders och 140 graders swashplattor.

KDS Flybarless E-Bar kommer inklusive programmeringskort med tydlig LCD display. Ingen dator behövs alltså för att göra justeringar i din E-Bar.

Specifikation:

  • KDS-EBAR applies to 32 bit micro-controller with Super processing and operation ability
  • KDS-EBAR comes with high performance built-in gyro sensor. It can work for all 250 size to 700 size Nitro or EP powered rc helicopters.
  • KDS-EBAR supports traditional 90 degree swash, and 120 degree and 140 degree swash.
  • KDS-EBAR features built-in spinning correcting functions. When helicopter spins, and rotates tail, it will spin at a fixed point steadily, but not drift.
  • The functions of sensor inside KDS-EBAR are the same KDS900 gyro’s; KDS-EBAR can work with narrow band 760us servos.
  • It is simple to set each parameter of KDS-EBAR in setup card attached, but no need computer.
  • Operating voltage: 4.8V-9V
  • Quiescent current: 50mA
  • Operating temperature: 20 degree ~45 degree
  • Operating humidness: 0%~80%
  • Dimension: 39 x 30 x 15mm (length x width x height)
  • Weight: 30 grams (with connecting wire)

Pris: 1465 kr
stockstatus Finns i lager
Finns ej i lager
stockstatus .
  Lägg i varukorg »
stockstatus Finns ej i lager

Artikelnummer:
2007A11-14


Bookmark and Share





Produktbeskrivning:

KDS Models populära E-Bar System kan användas på alla elektriska och nitrodrivna flybarless helikoptrar från storlek 250 till 700.
Den stöder traditionella 90 graders swashar,  120 graders och 140 graders swashplattor.

KDS Flybarless E-Bar kommer inklusive programmeringskort med tydlig LCD display. Ingen dator behövs alltså för att göra justeringar i din E-Bar.

Specifikation:

  • KDS-EBAR applies to 32 bit micro-controller with Super processing and operation ability
  • KDS-EBAR comes with high performance built-in gyro sensor. It can work for all 250 size to 700 size Nitro or EP powered rc helicopters.
  • KDS-EBAR supports traditional 90 degree swash, and 120 degree and 140 degree swash.
  • KDS-EBAR features built-in spinning correcting functions. When helicopter spins, and rotates tail, it will spin at a fixed point steadily, but not drift.
  • The functions of sensor inside KDS-EBAR are the same KDS900 gyro’s; KDS-EBAR can work with narrow band 760us servos.
  • It is simple to set each parameter of KDS-EBAR in setup card attached, but no need computer.
  • Operating voltage: 4.8V-9V
  • Quiescent current: 50mA
  • Operating temperature: 20 degree ~45 degree
  • Operating humidness: 0%~80%
  • Dimension: 39 x 30 x 15mm (length x width x height)
  • Weight: 30 grams (with connecting wire)
RC Modeller
Övriga Produkter
Tillverkare
Övrigt